3-Day Fiber Optics Hands-ON

Google's Ad
COURSE DESCRIPTION
The 3-Day Hands-ON Fiber Optics course explains more on fiber optics transmission concept, safety aspects in handling optical fiber and the latest applications using fiber optics as its main medium of transmission. 
This hands-on course stress more on 
  • main course of fiber optics extrinsic and intrinsic losses
  • recommended guidelines to avoid unnecessary additional losses in handling fiber optics 
  • troubleshooting fiber optics faults using OTDR 
  • testing and commissioning of fiber optics cabling as per TIA/EIA guidelines ​
​Participants are expected to complete fiber optics cabling including preparation, jointing or splicing, termination, testing and commissioning of singlemode fiber optics cable including mechanical splicing and connectors manual termination.
​
OUR GOALS

​Those who attended Our 3-Day Fiber Optics Hands-ON are either the end-users of fiber optics network or the contractors or subcontractors  doing installation and testing of fiber optics cabling works. 
​Based upon our participants feedback on installation & testing of fiber optics, it is safe to conclude that majority of the end-users or contractors were not aware of TIA/EIA standard testing procedures plus the allowance of acceptance testing analysis data. The test gears being used at site during testing were merely to show to clients that fiber optics indeed in good working condition by showing OTDR charts. But most end-users or contractors have no clues what those charts were all about and unable to clarify or verify the condition of tested fiber optics   

​Our main goal is to let our participants to be informed of international TIA/EIA testing standard procedures by using the proper fiber optics test gears and tools as recommended accordingly. 
By the end of the course our  participants as the end-users of fiber optics network should be able to read and analyse testing data presented to  them by respective fiber optics cabling contractors and able to decide the proper acceptance testing values. 
On the other hand, to our participants as fiber optics cabling contractors  should be able to render their services professionally and provide the proper and required testing documentation as per TIA/EIA standards  and most importantly to gain trust and confidence from their clients.
Clik & Get to Know Your Trainer
​Your 3-Day Fiber Optics Hands-ON Trainer 
COURSE SYLLABUS
SESI 1
Fiber Optics Quiz
SESI 2
History, Timeline, Jargon, Transmitting & Receiving Video, Voice & Data
SESI 3
Safety Guideline, Fiber Optics Composition & Topology 
SESI 4
Fiber Optics Cable, Connectors, Accessories & Connector Termination 
SESI 1
Fusion & Mechanical Splicing 
SESI 2
Hands-ON Termination & Splicing 1 
SESI 3
Hands-ON Termination & Splicing  2
SESI 4
Introduction & Hands-ON OTDR Tier 1 Testing 
SESI 1
Introduction & Hands-ON Tier 2 Power Meter & Light Source Testing 
SESI 2
Hands-ON Testing & Troubleshooting 
SESI 3
Hands-ON Testing  & Troubleshooting
SESI 4
CA2C Exam Preparation
TEST GEARS & TOOLS 
Relevant fiber optics test gears and tools shall be provided accordingly.
Fusion Splicing Machine
+ Stripping
+ Cleaning
+ ​Cleaving
Power Meter & Light Source
+ Budget Loss
+ Acceptance Testing
+ Calibration
+ Troubleshooting
Visual Fault Locator
+ Troubleshooting
OTDR
+ Fiber Length 
+ Splice Location
+ Loss Fiber
​+ Macrobending
Fiber Optics Microscope
+ To check end ferrule quality
Fiber Identifier
+ To verify light transmission in fiber optics strand
Quick Connector
Penyambungan Fiber Secara Mechanical
FIBER OPTICS HANDS-ON 
Fiber Optics Preparation 
Troubleshooting
Cleaning Connectors 
Fusion Splicing
Mechanical Splicing
Cleaning Adapter
Power Budget Loss Calculation
Connector Termination 
Fiber Optics Talk Set
Ferrule Inspection
Troubleshooting using  OTDR
Pengujian Tier 1
Pentauliahan gentian optik menggunakan Power Meter & Light Source
Pengujian Tier 2
Pentauliahan gentian optik menggunakan OTDR
EXPERIENCE IN FIBER OPTICS 
Beginners are most welcomed
MEDIUM OF INSTRUCTION
In Bahasa Malaysia
PARTICIPANTS BACKGROUND
  • Participants must be able to distinguish between different colors.
  • Non-allergic to isoprophyl alcohol.
  • Good eye-sight.
  • Able to complete fine task hands-on
COURSE MATERIALS
Material notes will be given in PDF format  for easy understanding.
​
​Untuk maklumat lanjut, anda boleh Click to Chat WhatsApp Business kami..
Google's Ad
2019 
COURSE SCHEDULE
COURSE LOCATION
Sinaran Training Center
​Kuala Lumpur
​
​Please click
Clik-To-Chat
below for training at your premise or outside
​Kuala Lumpur area
COURSE DATE
​Mon - Wed
Min. 2 pax

Please click
Click-To-Chat
below for booking and payment. 
TERMS
​Course fee does not include accommodation, transportation and food & beverages. 
COURSE FEE
RM 1,880.00 per person
​Min. 2 persons
Max. 6 persons

Inclusive of exam fee for both  CA2C & CA1C.

Exam CA1C & CA2C dates are both subjected to TM's confirmation.

Please Click to Chat for booking and payment
Google's Ad
FIBER OPTICS COMPETENCY CERTIFICATE 
​
Upon successful completion of 3-Days Fully Hands-On  each participant will be issued :-
a.  Certificate of Training by Sinaran Mikron Optik.
b.  MCMC Competency Fiber Optics Personnel (upon passing both exams)

If you are looking a Fiber Optics Personnel Competency Certificate issued by MCMC or other international certification providers , please click HERE.
COURSE REGISTRATION

    Registration Form
    3-Day Fiber Optics Hands-ON
RELATED COURSES