7-Day Fiber Optics Hands-ON
ABOUT THIS COURSE
- Undoubtedly fiber optics network cabling either in the external and internal parts of the construction site has always undergone changes in specification requirements according to location and construction site environment.
- Similarly, those who install and maintain fiber optics network cabling must those who are competent with the right knowledge and skills in order to produce high reliability of optical network cabling.
- On the other hand, if those who are installing and maintaining optical fiber cabling network have virtually no fiber optics knowledge and skills, undoubtly they will produce a low reliability fiber optics network.
- Thus a low reliability fiber optics network cabling will result in a non optimum fiber optic performance which leads to higher cost in the effort to conduct troubleshooting and to find immediate solutions which requires time and manpower.
- It is the main goal of this 7-Day Hands-ON Fiber Optics Course to produce skilled , knowledgeable and competent installers that leads to high reliability fiber optics network thus giving further cost savings on problem solving and maintenance.
OUR GOALS
Based upon our participants feedback on installation & testing of fiber optics, majority of the end-users or contractors were not aware of TIA/EIA standard testing procedures plus the allowance of acceptance testing analysis data.
The test gears being used at site during testing were merely to show to clients that fiber optics indeed in good working condition by showing OTDR charts.
But most end-users or contractors have no clues what those charts were all about and unable to clarify or verify the condition of tested fiber optics
At the end of the course, the 7-Day Hands-ON Fiber Optics would be able to conduct following fiber optics testing and commissioning as per recommended TIA/EIA standards.
With the above testing data being analysed and respectively documented, the participants can be rest assured that tested fiber optic network is indeed within acceptable allowable testing values by comparing the calculated and measured testing data.
Furthermore, the proper documented testing data is a proved that the fiber optics installers have rendered their services professionally and most importantly to gain trust and confidence from end-users.
With the above testing data being analysed and respectively documented, the participants can be rest assured that tested fiber optic network is indeed within acceptable allowable testing values by comparing the calculated and measured testing data.
Furthermore, the proper documented testing data is a proved that the fiber optics installers have rendered their services professionally and most importantly to gain trust and confidence from end-users.
In this course you will learn how to create specifications that in tandem to data transmission and hence to ensure installation reliabilities to reduce fiber optics sytem breakdown downtime with minimum cost possible.
Design
a. the components or elements of fiber optics network
b. the design & performance process
c. calculation of power budget loss
Costing
a. material costing
b. manpower & installation costing
c. overseas and local fiber optics suppliers
Installation
a. Outdoor & indoor fiber optics installation
b. manpower & certification requirement
c. skills & knowledge to target zero maintenance
Testing & Commissioning
a. Usage of various optical fiber tools & test gearts
b. Power Budget calculation vs actual measured data
c. Steps to identify fiber optics component high loss
Maintenance
a. Usage of proper tools and test gears
b. Step-by-step to rectify problems
c. Actions taken to reduce or to have zero fiber optics network downtime.
Design
a. the components or elements of fiber optics network
b. the design & performance process
c. calculation of power budget loss
Costing
a. material costing
b. manpower & installation costing
c. overseas and local fiber optics suppliers
Installation
a. Outdoor & indoor fiber optics installation
b. manpower & certification requirement
c. skills & knowledge to target zero maintenance
Testing & Commissioning
a. Usage of various optical fiber tools & test gearts
b. Power Budget calculation vs actual measured data
c. Steps to identify fiber optics component high loss
Maintenance
a. Usage of proper tools and test gears
b. Step-by-step to rectify problems
c. Actions taken to reduce or to have zero fiber optics network downtime.
COURSE SYLLABUS
|
Light Skills Learning Part 1 : Introduction to Fiber Optics Part 2 : Properties of Light Part 3 : How Fiber Optics Works Part 4 : Standards & Terminalogies Part 5 : Safety in Fiber Optics Part 6 : Fiber Optics Components Part 7 : Fiber Optics Cables Part 8 : Cables Procurement Part 9 : Handling Fiber Optics Cables Part 10 : Outdoor Fiber Optics Cable Installation Part 11 : Indoor Fiber Optics Cable Installation Part 12 : Splicing & Termination Part 13 : Fiber Optics Connectors Part 14 : Power Meter Test Procedure Part 15 : Tier 1 Testing (OTDR) Part 16 : Tier 2 Testing (Power Meter & Light Source) Part 17 : Loss Budget Calculation Part 18 : Fiber Optics Installation Tests Part 19 : Testing Results Analysis Part 20 : Fault Findings & Troubleshooting Part 21 : Maintenance Part 22 : Restorations Part 23 : Documentations Part 24 : Fiber Design Fundamentals Part 25 : Revision Class CA1C & CA2C (for local only) |
Hands-ON Skills Learning Skill 1 : Fusion & Mechanical Splicing Skill 2 : Connector Termination & Cleaning Skill 3 : Cable Preparation Skill 4 : Fiber Optics Management Skill 5 : OTDR Skill 6 : Light Source & Power Meter Skill 7 : ORL & IL Testing Skill 8 : VFL, Fiber Identifier, Microscope, Talk Set Skill 9 : Fiber Optics Tier 1 Testing Skill 10 : Fiber Optics Tier 2 Testing Skill 11 : Troubleshooting & Fault Findings Skill 12 : Documentation |
TEST GEARS & TOOLS
All fiber optics tools and test gears plus fiber optics cable accessories and consumables will be made available to all participants.
All fiber optics tools and test gears plus fiber optics cable accessories and consumables will be made available to all participants.
Fusion Splicing Machine
|
Power Meter & Light Source
|
Visual Fault Locator
|
OTDR
|
Fiber Optics Microscope
|
Fiber Identifier
|
Connectors Termination
|
Quick Connector
|
Mechanical Splicing
|
HANDS-ON
Ferrule Inspection
|
OTDR Troubleshooting
|
1.0 Fusion Splicing fiber cable preparation
|
|
2.0 Tier 1 & Tier 2 Testing
|
|
Tier 1 Testing
Power Meter & Light Source |
Tier 2 Testing
OTDR |
3.0 Connection to equipment via fiber optics media converter
|
|
PRIOR EXPERIENCE
Beginners are most welcomed
SIAPA YANG PATUT HADIRI KURSUS INI
End Users
a. you will be able to tell the difference if installed fiber optics cable is in fact in good condition by analysing the testing & commissioning measured & calculated data.
b. you will be more satisfied about the installation being done and be more confident in accepting the installation for payment purpose.
b. you will be able to conduct 1st level of maintenance & troubleshooting in identifying faulty components hence able to identify and rectify downtime network prior to calling fiber optics contractors.
Consultants or contractors or installers or supervisors
a. you will be able to know that your installation is in fact in good condition by analysing measured and calculated testing data before handing over to client for payment purpose.
b. with skill and knowledge that being acquired during training, you will be more confident in discussing issues related to your installation.
c. you are confident enough that your installation require less maintenance during warranty period and this give more cost saving and time.
a. you will be able to tell the difference if installed fiber optics cable is in fact in good condition by analysing the testing & commissioning measured & calculated data.
b. you will be more satisfied about the installation being done and be more confident in accepting the installation for payment purpose.
b. you will be able to conduct 1st level of maintenance & troubleshooting in identifying faulty components hence able to identify and rectify downtime network prior to calling fiber optics contractors.
Consultants or contractors or installers or supervisors
a. you will be able to know that your installation is in fact in good condition by analysing measured and calculated testing data before handing over to client for payment purpose.
b. with skill and knowledge that being acquired during training, you will be more confident in discussing issues related to your installation.
c. you are confident enough that your installation require less maintenance during warranty period and this give more cost saving and time.
MEDIUM OF INSTRUCTION
Mixed English & Malay
PARTICIPANTS BACKGROUNDS
- Participants must be able to distinguish between different colors.
- Non-allergic to isoprophyl alcohol.
- Good eye-sight.
- Able to complete fine task hands-on
COURSE MATERIALS
Material notes will be handed out on the course first day.
Untuk maklumat lanjut, anda boleh Click to Chat WhatsApp Business kami..
SIJIL KECEKAPAN FIBER OPTIK
Upon successful completion of 7-Days Hands-On Fiber Optics each participant will be issued :
a. Certificate of Training dari Sinaran Mikron Optik.
Please click INFO Sijil Kecekapan Fiber Optik
COURSE SCHEDULE
|
COURSE LOCATION Sinaran Training Center Kuala Lumpur |
COURSE DATES Upon request only.
Next Course Please WhatsAPP for mutually agreed training dates 
|
TERMS Course fee does not include transportation, accommodation and food & beverages. |
COURSE FEE RM 7,800.00 per pax
Upon request only. Min 4 pax. 
|
COURSE REGISTRATION
RELATED FIBER OPTICS COURSES
|
|
|
|
|
|