4-Day Fiber Optics Hands-ON
|
|
COURSE DESCRIPTION
The 4-Day Hands-ON Fiber Optics course explains more on fiber optics transmission concept, safety aspects in handling optical fiber and the latest applications using fiber optics as its main medium of transmission.
This hands-on course stress more on
- main course of fiber optics extrinsic and intrinsic losses
- recommended guidelines to avoid unnecessary additional losses in handling fiber optics
- troubleshooting fiber optics faults using OTDR
- testing and commissioning of fiber optics cabling as per TIA/EIA guidelines
If you would like this 4-Day Hands-On Course to be claimable under Malaysia's Human Resource Development Fund or HRDF please do let us know.
OUR GOALS
Those who attended Our 4-Day Fiber Optics Hands-ON are either the end-users of fiber optics network or the contractors or subcontractors doing installation and testing of fiber optics cabling works.
Based upon our participants feedback on installation & testing of fiber optics, it is safe to conclude that majority of the end-users or contractors were not aware of TIA/EIA standard testing procedures plus the allowance of acceptance testing analysis data. The test gears being used at site during testing were merely to show to clients that fiber optics indeed in good working condition by showing OTDR charts. But most end-users or contractors have no clues what those charts were all about and unable to clarify or verify the condition of tested fiber optics
Our main goal is to let our participants to be informed of international TIA/EIA testing standard procedures by using the proper fiber optics test gears and tools as recommended accordingly.
By the end of the course our participants as the end-users of fiber optics network should be able to read and analyse testing data presented to them by respective fiber optics cabling contractors and able to decide the proper acceptance testing values.
On the other hand, to our participants as fiber optics cabling contractors should be able to render their services professionally and provide the proper and required testing documentation as per TIA/EIA standards and most importantly to gain trust and confidence from their clients.
COURSE SYLLABUS
SESI
Fiber Optics Quiz
SESI 2
Transmission in Fiber Optic, Safety & Types
SESI 3
Hands-ON Fiber Optics Termination &Splicing (SM) - Indoor
SESI 4
Hands-ON Fiber Optics Termination &Splicing (SM) - Indoor
Fiber Optics Quiz
SESI 2
Transmission in Fiber Optic, Safety & Types
SESI 3
Hands-ON Fiber Optics Termination &Splicing (SM) - Indoor
SESI 4
Hands-ON Fiber Optics Termination &Splicing (SM) - Indoor
SESI 1
Hands-ON Fiber Optics Termination &Splicing (SM) - Indoor
SESI 2
Hands-ON Fiber Optics Termination &Splicing (SM) - Outdoor
SESI 3
Hands-ON Fiber Optics Termination &Splicing (SM) - Outdoor
SESI 4
Hands-ON Fiber Optics Termination &Splicing (SM) - Outdoor
Hands-ON Fiber Optics Termination &Splicing (SM) - Indoor
SESI 2
Hands-ON Fiber Optics Termination &Splicing (SM) - Outdoor
SESI 3
Hands-ON Fiber Optics Termination &Splicing (SM) - Outdoor
SESI 4
Hands-ON Fiber Optics Termination &Splicing (SM) - Outdoor
SESI 1
Introduction & Hands-ON Fiber Optics Tier 1 Testing Using OTDR
SESI 2
Introduction & Hands-ON Fiber Optics Tier 1 Testing Using OTDR
SESI 3
Introduction & Hands-ON Fiber Optics Tier 2 Testing Using Power Meter & Light Source
SESI 4
Introduction & Hands-ON Fiber Optics Tier 2 Testing Using Power Meter & Light Source
Introduction & Hands-ON Fiber Optics Tier 1 Testing Using OTDR
SESI 2
Introduction & Hands-ON Fiber Optics Tier 1 Testing Using OTDR
SESI 3
Introduction & Hands-ON Fiber Optics Tier 2 Testing Using Power Meter & Light Source
SESI 4
Introduction & Hands-ON Fiber Optics Tier 2 Testing Using Power Meter & Light Source
SESI 1
Hands-ON Testing & Troubleshooting
SESI 2
Hands-ON Testing & Troubleshooting
SESI 3
Hands-ON Testing & Troubleshooting
SESI 4
Documentation
Hands-ON Testing & Troubleshooting
SESI 2
Hands-ON Testing & Troubleshooting
SESI 3
Hands-ON Testing & Troubleshooting
SESI 4
Documentation
COURSE HIGHLIGHT
In this course you will learn how to create specifications that in tandem to data transmission and to ensure installation reliabilities to reduce fiber optics sytem breakdown downtime with minimum cost possible.
Design
a. the components or elements of fiber optics network
b. the design & performance process
c. calculation of power budget loss
a. the components or elements of fiber optics network
b. the design & performance process
c. calculation of power budget loss
Installation
a. Outdoor & indoor fiber optics installation
b. manpower & certification requirement
c. skills & knowledge to target zero maintenance
a. Outdoor & indoor fiber optics installation
b. manpower & certification requirement
c. skills & knowledge to target zero maintenance
Testing & Commissioning
a. Usage of various optical fiber tools & test gearts
b. Power Budget calculation vs actual measured data
c. Steps to identify fiber optics component high loss
a. Usage of various optical fiber tools & test gearts
b. Power Budget calculation vs actual measured data
c. Steps to identify fiber optics component high loss
Maintenance
a. Usage of proper tools and test gears
b. Step-by-step to rectify problems
c. Actions taken to reduce or to have zero fiber optics network downtime.
a. Usage of proper tools and test gears
b. Step-by-step to rectify problems
c. Actions taken to reduce or to have zero fiber optics network downtime.
HANDS-ON TEST GEARS
- All fiber optics tools and test gears plus fiber optics cable accessories and consumables will be made available to all participants.
Fusion Splicing
+ Stripping
+ Cleaning + Cleaving |
Testing & Commissiong
+ Budget Loss
+ Acceptance Testing + Calibration + Troubleshooting |
Visual Fault Locator
+ Troubleshooting
|
Visual Fault Locator
+ Fiber Length
+ Splice Location + Loss Fiber + Macrobending |
Microscope
+ To check end ferrule quality
|
Fiber Identifier
+ To verify light transmission in fiber optics strand
|
HANDS-ON EXERCISE
Preparation of optical fiber cable
|
Fusion Splicing
|
Power Budget Loss Calculation
|
Troubleshooting via VFL
|
Ferrule Cleaner
|
Adapter Cleaner
|
Ferrule Inspection
|
Troubleshooting via OTDR
|
Outdoor Jointing
|
Outdoor Cable Preparation
|
Pengujian Tier 1
Pentauliahan gentian optik menggunakan Power Meter & Light Source |
Pengujian Tier 2
Pentauliahan gentian optik menggunakan OTDR |
PRIOR KNOWLEDGE IN FIBER OPTICS
- Beginners are most welcomed.
WHO SHOULD ATTEND
End Users
a. you will be able to tell the difference if installed fiber optics cable is in fact in good condition by analysing the testing & commissioning measured & calculated data.
b. you will be more satisfied about the installation being done and be more confident in accepting the installation for payment purpose.
b. you will be able to conduct 1st level of maintenance & troubleshooting in identifying faulty components hence able to identify and rectify downtime network prior to calling fiber optics contractors.
Consultants or contractors or installers or supervisors
a. you will be able to know that your installation is in fact in good condition by analysing measured and calculated testing data before handing over to client for payment purpose.
b. with skill and knowledge that being acquired during training, you will be more confident in discussing issues related to your installation.
c. you are confident enough that your installation require less maintenance during warranty period and this give more cost saving and time.
WHAT WILL YOU LEARNED?
What will you learned?
a. proper installation as per specifications
b. type of fiber optics connector terminations
c. type of splicing or jointing fiber optics
d. testing as per TIA/EIA standards
e. commissioning as per TIA/EIA standards
f. maintenance & troubleshooting
g. restoration of fiber optics
h. proper usage of fiber optics test gears & tools
i. tricks and treats of fiber optics installers
MEDIUM OF INSTRUCTION
- In Bahasa Malaysia.
PARTICIPANTS BACKGROUND
- Participants must be able to distinguish between different colors.
- Non-allergic to isoprophyl alcohol.
- Good eye-sight.
- Able to complete fine task hands-on
For details please feel free to click our WhatsApp Busines Click to Chat
COURSE MATERIALS
- Material notes will be given in PDF format for easy understanding.
|
|
COURSE FEE
HANDS-ON FIBER OPTICS COURSE PACKAGE
PAKEJ HANDS-ON SOLO (NON-SHARING)
The provided one set of tools, test equipments and accessories shall be solely used by participants.
The provided one set of tools, test equipments and accessories shall be solely used by participants.
PAKEJ HANDS-ON BERPASANGAN (Sharing Basis)
The provided one set of tools, test equipments and accessories shall be shared by 2 participants.
The provided one set of tools, test equipments and accessories shall be shared by 2 participants.
|
COURSE LOCATION Sinaran's Training Center Kuala Lumpur |
COURSE DATES Please WhatsApps with proposed training dates by clicking below link.
|
TERMS Course fee does not include accommodation and food & beverages. Class shall proceed with min 2 pax for Pakej Solo and 2 pax for Pakej Berpasangan |
COURSE FEE 4-Hari Hands-ON Fiber Optics Course
SOLO RM 2,800.00 per pax BERPASANGAN RM 1,800.00 per pax (Max. 2 peserta) Class shall proceed with min 2 pax for Pakej Solo and 2 pax for Pakej Berpasangan 
|
FIBER OPTICS COMPETENCY CERTIFICATE
Upon successful completion of 4-Days Fully Hands-On each participant will be issued :-
a. Certificate of Training
For further details on MCMC Sijil Kecekapan Fiber Optik please click HERE.
a. Certificate of Training
For further details on MCMC Sijil Kecekapan Fiber Optik please click HERE.
COURSE REGISTRATION
RELATED FIBER OPTICS COURSES
|
|
|